MPG is not working in MDI

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Marik
Posts: 60
Joined: Sun Dec 08, 2013 1:42 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

MPG is not working in MDI

Post by Marik »

Hi folks,

We have Centroid with Allin1DC on a mill. The MPG is not working in MDI, but it works fine if we get out of MDI. We use keyboard jogging. The manual says ALT W should engage MPG, but it's not the case. Anything we are missing?

Thanks, M
Top
cnckeith
Posts: 7495
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: MPG is not working in MDI

Post by cnckeith »

you can change the plc program to allow the mpg to be active in MDI mode. typically this is not a good idea..but as long as you know thats the way your machine is configured...
drop an email to tech@ajaxcnc.com and they will let you know how to make the change.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Post Reply

Return to “Centroid Oak, Allin1DC, MPU11 and Legacy products”