Pendent help
Moderator: cnckeith
-
- Posts: 4
- Joined: Mon Nov 22, 2021 1:46 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Pendent help
Can i use the imac p4-s pendent on the acorn controller , if so how to wire
-
- Posts: 2189
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact:
Re: Pendent help
No, Only Centroid Pendants will work, but there are some USB keyboard emulators that will offer some function at a lower price
-
- Posts: 44
- Joined: Mon Mar 15, 2021 10:04 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 4372
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: south east texas
Re: Pendent help
Yes you can use a Playstation controller on acorn it is done the same way a Xbox controller is used see this video on YouTube
The name of the video is Centroid acorn cnc with an Xbox controller by Rick Sparber... check it out I did the same to use the Xbox controller until I got my mpg
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Pendent help
Again, generally any keyboard emulator will work.
Alternately, a nice inexpensive solution is the Contour Shuttle Express (Same thing Tormach uses):
These are supported by Centroid:
https://www.centroidcnc.com/centroid_di ... ntrol.html
Contour Shuttle Express info:
https://www.centroidcnc.com/centroid_di ... uttle.html
Alternately, a nice inexpensive solution is the Contour Shuttle Express (Same thing Tormach uses):
These are supported by Centroid:
https://www.centroidcnc.com/centroid_di ... ntrol.html
Contour Shuttle Express info:
https://www.centroidcnc.com/centroid_di ... uttle.html
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ