Notepad++ administrator mode

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cmickey
Posts: 15
Joined: Thu Jan 21, 2021 6:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Notepad++ administrator mode

Post by cmickey »

Hi all. I am installing NP++ by watching the recommended video. Everything went good until I got to the file association part. NP++ shows a message that wants me in administrator mode to continue. Picture attached.
Attachments
unnamed.jpg
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Notepad++ administrator mode

Post by ShawnM »

Easy Peasy, just close the program, right mouse click on the NP++ icon and select "run as administrator", when the pop up occurs select "yes" to allow it to make changes to your device. :mrgreen:
cmickey
Posts: 15
Joined: Thu Jan 21, 2021 6:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Notepad++ administrator mode

Post by cmickey »

Thanks Shawnm that was EASY PEASY. I had never come across that before. I will finish set up and try a simple gcode now.
Post Reply