Notepad++ administrator mode
Moderator: cnckeith
-
- Posts: 15
- Joined: Thu Jan 21, 2021 6:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Notepad++ administrator mode
Hi all. I am installing NP++ by watching the recommended video. Everything went good until I got to the file association part. NP++ shows a message that wants me in administrator mode to continue. Picture attached.
-
- Posts: 2224
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Notepad++ administrator mode
Easy Peasy, just close the program, right mouse click on the NP++ icon and select "run as administrator", when the pop up occurs select "yes" to allow it to make changes to your device.
-
- Posts: 15
- Joined: Thu Jan 21, 2021 6:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Notepad++ administrator mode
Thanks Shawnm that was EASY PEASY. I had never come across that before. I will finish set up and try a simple gcode now.