vcp and centroid 12 not on the same monitor screen <solved, turn off tablet mode>

ZZBOB · Post by **ZZBOB** » Tue Dec 15, 2020 2:29 pm

HI THERE...
Check out the link below....
WIN.10
TABLET MODE...
VCP options...
Restart computer.....
ZZBOB....

viewtopic.php?f=60&t=3903&start=10

Garyy · Post by **Garyy** » Tue Dec 15, 2020 2:35 pm

The start screen can not be snipped but here are the 2 seperate pages
regards
Gary

Garyy · Post by **Garyy** » Tue Dec 15, 2020 2:51 pm

Hello all
Thanks for all the help. It seems that Tablet mode was turned on and separates pages ,turned it off reboot and it works.
Did not know there was such a thing as tablet mode.
Thanks again everyone.
Gary

Post by **martyscncgarage** » Tue Dec 15, 2020 2:59 pm

Garyy wrote: ↑Tue Dec 15, 2020 2:51 pm Hello all
Thanks for all the help. It seems that Tablet mode was turned on and separates pages ,turned it off reboot and it works.
Did not know there was such a thing as tablet mode.
Thanks again everyone.
Gary

Are you trying to use a tablet or a laptop and not a desktop PC?

Garyy · Post by **Garyy** » Wed Dec 16, 2020 2:35 pm

Hello Marty
I am using a desktop.
thankyou for your help. I did have the Tablet mode turned off but windows update turned it on . Turned it off again and all is fine
Thanks
Gary

Centroid Community CNC Support Forum

vcp and centroid 12 not on the same monitor screen <solved, turn off tablet mode>

Re: vcp and centroid 12 not on the same monitor screen

Re: vcp and centroid 12 not on the same monitor screen

Re: vcp and centroid 12 not on the same monitor screen

Re: vcp and centroid 12 not on the same monitor screen

Re: vcp and centroid 12 not on the same monitor screen