Acorn "System Draft" Schematic

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Acorn "System Draft" Schematic

Post by martyscncgarage »

Attached is the most recent DRAFT Acorn "SYSTEM" schematic.
It is a "Typical" schematic that could be used when wiring control cabinets, especially those with Servo drives.
Its use is intended as a guideline only. Each application is unique and its ultimately up to the individual user to wire their cabinets to suit their needs following good practice.
Attachments
ACORN_SYSTEM-DRAFT-4.zip
(941.68 KiB) Downloaded 288 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply