DIY CNC Gear and Tools we use but don't sell.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7919
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

DIY CNC Gear and Tools we use but don't sell.

Post by cnckeith »

Hello. I repeatably get asked, oh while i got you on the phone...what monitor do you use? what crimpers do you like? what prox switches are good?, what heat shrink is good? etc.etc.. so in an effort to answer those questions i started this page.. "DIY CNC Gear and Tools we use but don't sell." https://www.centroidcnc.com/centroid_di ... _gear.html
The page is just a start, but i hope to add more items to it as i get the time.

Also if you have something you think would be a good thing to add that you think might make life easier for the next guy post it here on this thread so, maybe a new CNC builder can gain from all our time of trial and error using different tools and such so they can do it right the first time!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html


slodat
Posts: 793
Joined: Thu Apr 12, 2018 11:16 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: DIY CNC Gear and Tools we use but don't sell.

Post by slodat »

Anyone have suggestions on cable to use for limit switches that is oil resistant and made for constant flexing, like on a knee mill?


tblough
Posts: 3278
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: DIY CNC Gear and Tools we use but don't sell.

Post by tblough »

I use Igus Chainflex M CF898

https://www.igus.com/product/1110
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.


DannyB
Posts: 109
Joined: Mon Jan 15, 2018 1:11 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: A900712
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: DIY CNC Gear and Tools we use but don't sell.

Post by DannyB »

tblough wrote: Fri Jan 03, 2020 8:49 am I use Igus Chainflex M CF898

https://www.igus.com/product/1110

+1. There are other similar chainflex products that work as well.

Automationdirect sells a number of the chainflex products by the foot.
It's slightly cheaper to by them from igus directly, but a little more of a hassle.


MMCDesign
Posts: 9
Joined: Sun Oct 07, 2018 1:10 am
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: K21145
DC3IOB: No
CNC11: No
CPU10 or CPU7: Yes

Re: DIY CNC Gear and Tools we use but don't sell.

Post by MMCDesign »

Thanks. This is a helpful thread.
Mike


cnckeith
Posts: 7919
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: DIY CNC Gear and Tools we use but don't sell.

Post by cnckeith »

i like this 22" resistive touch LCD monitor!
https://amzn.to/4796vYI
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html


Post Reply