I have found several good macros for Z axis touch plates BUT
I have a CNCrouterparts (Avid) 3 axis touch plate that works with Mach 3/4 using their
supplied XML file, and would like to use it with my Acorn CNC12 v4.18 controller.
Has anyone created a 3 axis (XYZ) macro or can lead me down the right path?
Any help would be great
3 Axis Macro Needed for Touch Plate
Moderator: cnckeith
-
- Posts: 3
- Joined: Fri May 24, 2019 3:38 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: 3 Axis Macro Needed for Touch Plate
Like this? I only use it for XY (inside or outside corners), but could be use for Z as well.
https://drive.google.com/open?id=1Jif-- ... _OR4PY5Qco
https://drive.google.com/open?id=1Jif-- ... _OR4PY5Qco
Scott
-
- Posts: 3
- Joined: Fri May 24, 2019 3:38 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 3 Axis Macro Needed for Touch Plate
Yes! Not exact but very similar.
Would you share your macro
Would you share your macro
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: 3 Axis Macro Needed for Touch Plate
Sure, but I won't be able to grab it until Thursday morning.
Scott
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: 3 Axis Macro Needed for Touch Plate
Here ya go. Read through and tweak to your needs.
- Attachments
-
- XYZeroPlate.mac.mac
- (2.42 KiB) Downloaded 231 times
Scott
-
- Posts: 3
- Joined: Fri May 24, 2019 3:38 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 3 Axis Macro Needed for Touch Plate
Thank you.
Much appreciated!
John
Much appreciated!
John