Acorn Not Powering Up (Multiple Power Supply Usage)

Moderator: cnckeith

Locked
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Acorn Not Powering Up (Multiple Power Supply Usage)

Post by martyscncgarage »

(From CNC Keith):
Hey guys if you are using multiple power supplies an experiencing no start, attached is a draft tech bulletin that covers several solutions to the no start. the best solution seems to be to use a multi voltage output power supply instead of separate units.
ACORN_dual_suppy_tech_bulletin_draft.pdf
(2.61 MiB) Downloaded 588 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Locked