Help with wiring acorn to integrated stepper motors

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Cam6.7Cummins
Posts: 1
Joined: Thu Jan 20, 2022 10:22 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: (302837901215215447)
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Help with wiring acorn to integrated stepper motors

Post by Cam6.7Cummins »

Hey, I’m looking for advice on wiring an acorn board with the DB25 to a set of AMCI SMD23 integrated stepper motors.
I will attach the stepper motor manual to the attachments
Thanks cam
Attachments
integrated-stepper-motor-drives.pdf
SMD23 stepper manual
(430.33 KiB) Downloaded 71 times
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Help with wiring acorn to integrated stepper motors

Post by cnckeith »

i moved this post into the main Acorn forum. :-)
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Help with wiring acorn to integrated stepper motors

Post by CNCMaryland »

These look similar to the JMC integrated servos. There was a post about those not to long ago.
Post Reply