Laser cut brackets and parts for your build

[ShawnM]

I'm just throwing this out here to see if anyone needs this service. I know many users have more than one machine or access to other machines to make parts. I also know of the many online parts cutting companies. If anyone needs adaptor plates, brackets or small parts cut for their build or retrofit let me know. I have a 12kw fiber laser in the shop and A LOT of scrap aluminum laying around. If it sits too long it goes to the recycler. I have 1/8", 1/4", 3/8", 1/2" and 3/4" aluminum drops that I can cut smaller parts from. If you provide the DXF file to me I can cut the parts from scrap and ship them to you and it wont break the bank. You'll have to do any counterbores, chamfers or finishing but I can easily cut the parts for you from the scrap I have for not very much money. Again, this is providing you supply me with the DXF file.

Send me a private message and we can discuss what you need and go from there. Hopefully this will help some builders.

Shawn