I have a past project that allows you to setup a tangential knife, using cheap utility knife blades, on a CNC router table. Setup used a N23 Teknic ClearPath motor, but most any N23 stepper or servo could be used. Hopefully this project can be passed to someone else with a current interest. Note that this is an active "C axis" driven knife, but could be adapted to use as a passive "follower" knife.
Includes a mount bracket (fits CNC Depot S30, but can be bushed to fit most spindles), belts, pulleys, an ISO30 tool holder and 2 blade holder brackets.
Price: $100 email: gcnc411@gmail.com to purchase or more info
Here is a video of a working on a WinCNC controller, which has "native" support (optional $$ to play feature) for the tangential knife actions, but many low cost CAM programs have this feature built in.
Tangential Knife Setup
Moderator: cnckeith
-
Gary Campbell
- Posts: 2190
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: Yes
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Bergland, MI, USA
- Contact: