PM-728 Setup for sale

Moderator: cnckeith

Post Reply
jpmsteadi
Posts: 62
Joined: Fri Feb 19, 2021 5:51 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F1121A-1204204111
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

PM-728 Setup for sale

Post by jpmsteadi »

Precision Matthews PM728 cnc conversion

Asking 6850 OBO, be reasonable and we can work something out. Can help load at my location. I would suggest at the very least a pickup. A trailer is easier.

I bought this machine new in 2020, converted to cnc early 2021. It has made and continues to make good parts. I have transitioned into doing more commercial work and have a Sharp 2412 in the shop as well. Looking to sell the PM to make room for another larger, fanuc powered machine with a tool changer.

It is running acorn cnc with clearpath servo motors. Way overpowered motors at that. I got lucky on ebay when building the machine.

Some features:
-power drawbar with a foot pedal to operate it.
-2hp, 7k rpm spindle motor
-touchscreen monitor
-fogbuster mist coolant system
-auto oiler with distro box
-comes with TTS tooling, about 18 holders
-full enclosure with heavy steal table
-comes with tool touch off probe and spindle part probe

Some cons:

It is still a conversion, so some things aren’t perfect or the prettiest but everything is operational and making good parts.

The machine is under power, making parts, and able to be shown. Please contact me for more info.
jpmsteadi
Posts: 62
Joined: Fri Feb 19, 2021 5:51 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F1121A-1204204111
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: PM-728 Setup for sale

Post by jpmsteadi »

see pictures below. Please contact for more information. Machine is located in Atlanta, GA
Attachments
346670293_6092063230915066_3104797968106213329_n (1).jpg
346636012_6150189388383297_4127936075907235630_n.jpg
346441722_6337520006287379_5437624469837234146_n.jpg
346320627_5398023233633555_7291085679328166776_n.jpg
346226753_6633506706659320_1901293355067647690_n.jpg
345840533_6152089994887292_2662586349693338147_n.jpg
340280921_6267338333347500_6653914592936369787_n.jpg
skidd@savantltd.com
Posts: 8
Joined: Tue May 02, 2023 10:56 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF8D8D86-1221226768
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: PM-728 Setup for sale

Post by skidd@savantltd.com »

Is this still for sale?
Post Reply