**SOLD** Complete Acorn Setup with Accessories F/S

Moderator: cnckeith

Post Reply
JLambeth87
Posts: 9
Joined: Thu May 19, 2022 12:28 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Not Available Yet. I have purchased my system but haven't built it out yet.
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

**SOLD** Complete Acorn Setup with Accessories F/S

Post by JLambeth87 »

SOLD

Hello,
I ended up purchasing a Tormach 1100MX so I am no longer needing this package. Everything is brand new and has not been used other than powering up the Acorn to check it worked.

For sale I have the following:
Controller: Centroid CNC Acorn + Ether1616 Expansion + Wireless Pendent
Mill Pro Software License

All together was about $820. I'll sell for $750 shipped.
335747908_5907531795999312_2303432500633111303_n.jpg
335590627_6147901738565250_6081978771984852966_n.jpg
335576071_1452641395270762_647773672691718031_n.jpg
335573415_1633949510372936_7674074386681688590_n.jpg
335570531_1267387487465379_3053737559334322228_n.jpg

Josh
Last edited by JLambeth87 on Fri Mar 17, 2023 2:07 am, edited 1 time in total.

Top
JLambeth87
Posts: 9
Joined: Thu May 19, 2022 12:28 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Not Available Yet. I have purchased my system but haven't built it out yet.
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Complete Acorn Setup with Accessories F/S

Post by JLambeth87 »

Bump for price and pictures.

Top
JLambeth87
Posts: 9
Joined: Thu May 19, 2022 12:28 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Not Available Yet. I have purchased my system but haven't built it out yet.
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Complete Acorn Setup with Accessories F/S

Post by JLambeth87 »

SOLD

Top
Post Reply

Return to “Buy, Sell, Trade”