YASKAWA Servo motor sgmgv-30a3a61

Moderator: cnckeith

Post Reply
krissondors
Posts: 54
Joined: Sun Apr 26, 2020 10:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: SoCal

YASKAWA Servo motor sgmgv-30a3a61

Post by krissondors »

FOR SALE:

Used Yaskawa Sigma 5 servo motor
sgmgv-30a3a61

I have 4 if these motors. They are all in good working condition with no issues. I have run them all to check if they work and I can post videos of them running if interested. They come of a retrofited machine, but the machine wasn't used much and then ended up getting scrapped so the motors were pulled off.

$600 a motor + shipping. Will ship anywhere, I can give a quote if needed.
Attachments
20221220_225534.jpg
20221220_225604.jpg
20221220_225544.jpg
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: YASKAWA Servo motor sgmgv-30a3a61

Post by TheKitMill »

Do you have the Drives
krissondors
Posts: 54
Joined: Sun Apr 26, 2020 10:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: SoCal

Re: YASKAWA Servo motor sgmgv-30a3a61

Post by krissondors »

TheKitMill wrote: Thu Feb 09, 2023 11:39 am Do you have the Drives
I do, I also have a full Centroid kit for sale

https://ventura.craigslist.org/tls/d/ox ... 75763.html
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: YASKAWA Servo motor sgmgv-30a3a61

Post by TheKitMill »

Thanks for the link. I don't think the Sigma 5 will work for the Acorn six.
krissondors
Posts: 54
Joined: Sun Apr 26, 2020 10:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: SoCal

Re: YASKAWA Servo motor sgmgv-30a3a61

Post by krissondors »

TheKitMill wrote: Fri Feb 10, 2023 9:56 am Thanks for the link. I don't think the Sigma 5 will work for the Acorn six.
They actually will work with the Acorn just great with Step and Direction mode. Here is a link how to set them up with the Acorn:

https://www.centroidcnc.com/dealersuppo ... ds/297.pdf
TheKitMill
Posts: 153
Joined: Wed Sep 06, 2017 1:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: YASKAWA Servo motor sgmgv-30a3a61

Post by TheKitMill »

Hi Thanks for the info. I just bought at auction two Haas Mills a VF-OE and a VF-4 both basket cases for rebuild . If I need to replace any motors I will keep your in mind.
Post Reply