For Sale - Flexicam 7x12 router (chassis only)

Moderator: cnckeith

Post Reply
ShawnM
Posts: 1371
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 7804734C6498-0401191832
Location: Clearwater, FL

For Sale - Flexicam 7x12 router (chassis only)

Post by ShawnM »

Is any interested in rebuilding a LARGE cnc router? I can purchase the router which is close to 7x12 for $500. This is just the router gantry and base, no electronics, no motors no spindle. All three axis moves very well. This is a German made router and probably weighs about 4000 pounds. You would have to arrange pickup from Clearwater Florida. It has a phenolic grid vacuum table and was setup with a 10 tool ATC. There is no spindle. It has rack and pinion drive and all that is in place. It rides on square linear rails. The machine is a 2003 model and is extremely robust. Google Flexicam as they are still in business and I can try and get some pics if needed.

Anyone interested for $500 let me know ASAP. If not it's gonna get scrapped for steel.
Blaze
Posts: 7
Joined: Fri Nov 04, 2022 2:30 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0074

Re: For Sale - Flexicam 7x12 router (chassis only)

Post by Blaze »

i am interested do you still have it?
Blaze
Posts: 7
Joined: Fri Nov 04, 2022 2:30 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0074

Re: For Sale - Flexicam 7x12 router (chassis only)

Post by Blaze »

can you email picture?
fire_blaze_hot@yahoo.com
ShawnM
Posts: 1371
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 7804734C6498-0401191832
Location: Clearwater, FL

Re: For Sale - Flexicam 7x12 router (chassis only)

Post by ShawnM »

Table is no longer available.
Post Reply