4x8 ShopBot PRS ATC w/ Acorn system <sold!>

Moderator: cnckeith

Post Reply
Toaster
Posts: 195
Joined: Mon Oct 29, 2018 5:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

4x8 ShopBot PRS ATC w/ Acorn system <sold!>

Post by Toaster »

Hi all! After years of building and using my ShopBot PRS 4x8 ATC I've made the decision to sell it. You can find all of the details here:

https://www.digitallyfabbed.com/prs

This is a very nicely built machine that's rock solid. Check it out.
Toaster
Posts: 195
Joined: Mon Oct 29, 2018 5:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: 4x8 ShopBot PRS ATC w/ Acorn system

Post by Toaster »

Reduced the price a little.

This setup includes an S30C 24k RPM spindle 10 tool ATC, 8 zone vac table, ruby tipped probe, and much much more.

Here's a link that includes a full photo gallery, pricing and videos https://www.digitallyfabbed.com/prs
IMG_2202.jpg
IMG_2207.jpg
IMG_2215.jpg
IMG_2215.jpg
IMG_2225.jpg
Toaster
Posts: 195
Joined: Mon Oct 29, 2018 5:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: 4x8 ShopBot PRS ATC w/ Acorn system

Post by Toaster »

The machine has sold. Thanks everyone for their interest.
Post Reply