Hi all! After years of building and using my ShopBot PRS 4x8 ATC I've made the decision to sell it. You can find all of the details here:
https://www.digitallyfabbed.com/prs
This is a very nicely built machine that's rock solid. Check it out.
4x8 ShopBot PRS ATC w/ Acorn system <sold!>
Moderator: cnckeith
-
- Posts: 195
- Joined: Mon Oct 29, 2018 5:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: 4x8 ShopBot PRS ATC w/ Acorn system
Reduced the price a little.
This setup includes an S30C 24k RPM spindle 10 tool ATC, 8 zone vac table, ruby tipped probe, and much much more.
Here's a link that includes a full photo gallery, pricing and videos https://www.digitallyfabbed.com/prs
This setup includes an S30C 24k RPM spindle 10 tool ATC, 8 zone vac table, ruby tipped probe, and much much more.
Here's a link that includes a full photo gallery, pricing and videos https://www.digitallyfabbed.com/prs
-
- Posts: 195
- Joined: Mon Oct 29, 2018 5:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: 4x8 ShopBot PRS ATC w/ Acorn system
The machine has sold. Thanks everyone for their interest.