Techno LC4896 upgrade
Moderator: cnckeith
-
- Posts: 1
- Joined: Tue Feb 22, 2022 4:21 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: LC-4896-0457-033106
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Techno LC4896 upgrade
I am an Instructor at Northshore technical Community College. We have come across a Techno 4896 that used an old operating system that consisted of a PCI card, Windows xp with a SCSI cable to run this cnc. The system is no longer with the machine and i was wondering if anyone tried to upgrade using the Acorn CNC controller. Any input would be appreciated. Thanks!!!
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Techno LC4896 upgrade
hello. good machine, simply upgrade. go for it!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html