NEW!!! ShopBot PRT Controller

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

NEW!!! ShopBot PRT Controller

Post by Gary Campbell »

A new model of controller designed specifically for the low amperage, high inductance Oriental Motors PK296 and PK299 variants. Features the standard 4 axis of most legacy CNC routers and is expandable to a 5th motor (2nd vertical axis or rotary). Control is housed in a steel NEMA rated sealed control box with fan cooling. User replaceable current limiting resistors and fine tuning on the drive to dial in each motor to its best operation.
Includes a Lenovo CNC-PC, Pro License, setup, connected and preset to user's machine specs.

At its heart is the proven Centroid Acorn 4 and features all exterior labeled user connections for the following:

4 (optionally 5) stepper motors
X, Y and Z homing sensors or switches (24v NPN) and tool measure devices
ESTOP
Router or spindle on/off and speed control (spindles only)
JTech type engraving lasers

Options: (all in NEMA rated steel or ABS enclosures)
4th axis (5th motor) $150
3 button Pendant, ESTOP, Cycle Start, Feed Hold (2 can be reprogrammed) $125
Router on/off control module with SSR $100
Spindle Control Module with contactor and VFD harness $200
Centroid Wireless MPG Pendant with user selected SB macros installed $350
Motor tuning: Send us your motors and we will test and install the best resistor and tune the drive pot for the smoothest operation. $150 + shipping

Note: All features of the Centroid Acorn 4 do not have pre-labeled terminals on the exterior, but are available to the user via internal connections, should they be needed. Total Price: $2495 + shipping

For more info, or to purchase, email: gcnc411@gmail.com
Attachments
DSC00886.JPG
DSC00885.JPG
DSC00881.JPG
DSC00880.JPG
DSC00879.JPG
DSC00878.JPG
Last edited by Gary Campbell on Mon Feb 21, 2022 11:18 am, edited 2 times in total.
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: NEW!!! ShopBot PRT Controller

Post by Gary Campbell »

As the parts arrive, we are adding accessories. Here is a shot of the pendant.
Green and yellow buttons can be programmed to other functions
Acorn Basic Pendant.jpg
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Post Reply