Linux PC Computer for sale

Moderator: cnckeith

Post Reply
CNC GEEK
Posts: 1
Joined: Fri Oct 29, 2021 2:52 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Linux PC Computer for sale

Post by CNC GEEK »

I currently have 2 original Centroid PC computers running on Linux. These were removed from the control during a CNC control upgrade.
#1 Has a later model Gigabyte GA-M6ASME-S2 Mother board. Looks good, Boots right up. Currently with CNC7 board and Mill software.
Recommended for spare or replacement PC for your current Linux based Centroid CNC control. $500.00 includes packaging does not include shipping.
#2 Has its original MSI motherboard. There is 1 Capacitor that is crowning so its remaining life span may not be very long. Power supply is also making noise but this is easily replaced. Includes CNC7 board and Linux based mill software. Can ne used to test your current system or replace your current failed PC computer. $225.00 includes packaging does not include shipping. Can email video of the PC booting up. I ran these for 24 hours and found no glitches. Sold As is. Doug 714 404-2996
Attachments
#2-2.jpg
#2-1.jpg
#1-2.jpg
#1-1.jpg
Post Reply