Steel Control Boxes

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 1643
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI
Contact:

Steel Control Boxes

Post by Gary Campbell »

Guys...
Still on the house cleaning mission.... I have a few steel control boxes that were purchased for projects that didnt seem to materialize or a component change required a different size box. Gasketed door with 1/4 turn keyless latch. 3 are brand new in an unopened box with backplanes still in the wrapper. One has had the backplane drilled & tapped. No holes in box itself. SIzes are as follows: (in inches)

2 each 16w x 16h x 8dp (new) $100 ea + shipping
1 each 24w x 16h x 8dp (used backplane) $120 + shipping
1 each 20w x 16h x 10dp (new) $100 + shipping.
1 each 21.5h x 22.5h 16ga galvanized backplane (new) $20

Generic catalog pic of these units:

email gcnc411@gmail.com for more info or to purchase
Control Box.JPG
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Dhaffner
Posts: 24
Joined: Fri Aug 20, 2021 4:54 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Steel Control Boxes

Post by Dhaffner »

Sent you an email!
Post Reply