Milltronics VM17B CNC Mill conversion project

Moderator: cnckeith

Post Reply
Rdslasers
Posts: 14
Joined: Tue Dec 22, 2020 8:49 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Milltronics VM17B CNC Mill conversion project

Post by Rdslasers »

I have a Milltronics VM17B milling machine that lost its controller board, so the owner removed it and started a retrofit. It is now just the mill with the servos attached, and ready for the retrofit conversion. The mill has a 10 hp spindle motor, a air powered drawbar, and a spindle encoder.
It comes with the servo drives, the Hitachi VFD, a new American Rotary AD20 phase converter and a Baldor 20 hp motor. The Vice is a Kurt DX6 Crossover that is new, but has light surface rust that cleans off. There is a new cabinet with mounting plate, 14 tool holders and a installation holder for bit changes. I have the braking resister and other components, wire, cables and the servo drive programmer.
This needs a controller board to make this a complete CNC mill. The Centroid Oak would be a great board for this mill. This mill is located in Chillicothe Ohio, 45601 and you can email me at weesew@gmail.com for more info and my contact info. Price is $2,800 and I will trade for a 12-14 gauge metal brake or slip roller. Need to see to make room for my CNC plasma table that’s on order.
Attachments
31CE5FD4-B6B3-4CC1-8958-0A069D00D92A.jpeg
56C7A6CB-E321-4844-8CD8-EEEC091A25B9.jpeg
889B8902-6DC3-4129-93FD-7372C5B94439.jpeg
43AB734C-456E-4C50-9DB9-42F424A61BC1.jpeg
7DE6DA8E-25D9-4841-BCA4-7553E821F8DE.jpeg
664FBAAE-2AAD-401A-B422-E6E9EE8AD086.jpeg
75A7AB7C-ED42-4121-8734-26076802D6CF.jpeg
52865BFF-69CB-4D32-AB90-BA2584EB1BD4.jpeg
0D82013A-8BA0-439B-A8F0-E6379101C0C3.jpeg
823D88F9-FF22-4E66-9D53-1699FCB21AA7.jpeg
Post Reply