2 clearpath SDSK-3411P-RLN servos

Moderator: cnckeith

Post Reply
Nickles.charles
Posts: 6
Joined: Mon May 17, 2021 2:05 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

2 clearpath SDSK-3411P-RLN servos

Post by Nickles.charles »

Ive got two of these clearpath servos for sale SDSK 3411P-RLN. Both motors never mounted to machine and only used for a benchtest. Bought originally for one machine but I got for nothing a much better machine to retrofit. This new machine uses nema 23 and not these nema 34 so Id like to sell these.

Here is the link to the clearpath servo

https://www.teknic.com/model-info/CPM-S ... tage=75VDC

Warranty on the motors says good until 05-2023

New these are going for $328 each. I'd like to sell these for $250 plus shipping. If you buy both Ill cover the shipping to lower 48.

Thanks for looking.
Post Reply