Centroid 4-Axis M39 Allin1DC based CNC controller for Sale.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 3518
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Centroid 4-Axis M39 Allin1DC based CNC controller for Sale.

Post by cnckeith »

Centroid 4-Axis M39 Allin1DC based CNC controller for Sale.

Excellent running condition with low hours.

Centroid M39 closed loop CNC Controller with Allin1DC with DC servos that are powered by regular 110 VAC 20 amp house hold plug. Windows 10, Samsung SSD, powerful CNCPC with Asus Motherboard, DC servos. Latest CNC12 software with Pro License. Touch Screen compatible. Physical Operator control pendant and/or Virtual Operator Control Pendant.

Qty. 3 Made in USA 29 in-lb Nema 42 DC servo motors and Qty. 1 17 in-lb DC Servo.

This control system has very little hours on it and was used as a software development test bed.

Turn key system ready to run: $7,000

Retail for a fully wired 4 axis M39 DC system is over $12K here is your chance to get it around ½ price.
come and pick it up. 27915
Attachments
PXL_20210714_135811443.jpg
PXL_20210714_135806066.jpg
PXL_20210714_135840206.jpg
P1040696.JPG
P1040645-001.JPG
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply