DMM Tech Dyn 2 setup FS

Moderator: cnckeith

Post Reply
cfacundus
Posts: 1
Joined: Sat Aug 15, 2020 12:49 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 7804734BC508-0529192302

DMM Tech Dyn 2 setup FS

Post by cfacundus »

Includes:
3 x NEMA23 Frame, 0.4kW, D-Cut Shaft
Servo Drive:
3 x DYN2-TLA6S-00 AC Servo Drive
Encoder Cable:
3 x 3m Encoder Cable for DYN2
Motor Cable:
3 x 3m Motor Cable - Servo Motor for DYN2
$950 Shipped. I bought these for a machine and decided to go another route. Never installed only benchtested
Attachments
IMG_8051.JPG
IMG_8050.JPG
IMG_8049.JPG
JMS Racing
Posts: 2
Joined: Fri Dec 08, 2017 6:10 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 6064051BB0F7-1109170225 MPU12 System
Location: Scottsdale, AZ

Re: DMM Tech Dyn 2 setup FS

Post by JMS Racing »

Are these units still available?
Thank you
John
vinnito1
Posts: 6
Joined: Mon Oct 16, 2017 1:47 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: DMM Tech Dyn 2 setup FS

Post by vinnito1 »

John,

I IM'ed you if you are looking for a DYN2 drives
Post Reply