380 Volt hsd spindle

Moderator: cnckeith

Post Reply
Ken Rychlik
Posts: 346
Joined: Wed Jan 23, 2019 4:19 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 80F5B5B92C3A-0213236854
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

380 Volt hsd spindle

Post by Ken Rychlik »

Located on the SW side of Houston.
1-Hsd Manual tool change 380 volt spindle. (I don't have 380v available) asking $400
Text is the best way to reach me. 8Three2 four six2 oh 63four
Ken
Attachments
127237488_3090274974412035_6410039994620945795_o.jpg
Last edited by Ken Rychlik on Sat Jan 23, 2021 10:55 am, edited 3 times in total.
Ken Rychlik
Posts: 346
Joined: Wed Jan 23, 2019 4:19 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 80F5B5B92C3A-0213236854
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Two spindle's and Vac Pump

Post by Ken Rychlik »

I still have the manual change spindle
Ken
Post Reply