I have some parts that may interest some of you. Located on the SW side of Houston.
1-Hsd Manual tool change 380 volt spindle. (I don't have 380v available) asking $500
2-20hp regenerative Vac pump for vac hold down on a cnc router. 220v 3phase asking $700
Text is the best way to reach me. 8Three2 four six2 oh 63four
Ken
Two spindle's and Vac Pump
Moderator: cnckeith
-
- Posts: 142
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 780473845843-0201191601
-
- Posts: 142
- Joined: Wed Jan 23, 2019 4:19 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: 780473845843-0201191601
Re: Two spindle's and Vac Pump
ATC Spindle and vfd sold. I still have the manual change spindle and Vac pump available
Ken Rychlik (Cabinet Maker "Retired" SW side of Houston)