Emco VMC100 w Acorn, DMM servos FS

Moderator: cnckeith

Post Reply
MasterThrash
Posts: 2
Joined: Wed Sep 05, 2018 5:46 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Emco VMC100 w Acorn, DMM servos FS

Post by MasterThrash »

Emco VMC 100 running touchscreen Centroid Acorn. Complete retrofit done for personal use and never used. Machine found in almost unused condition. All Servos and motor controls have been meticulously custom fit into the back of the VMC making a very convenient package. Three DMM DYN 4 servos and controllers. Auto oiler, original motor and additionally a complete set of very rare and expensive ER collets !

Turret works perfectly but will need a PLC written. Other than that it's turn key and working for single tool, as it sits. Plug and play. Pristine. Save yourself months of work.

$5100
DM for more picts and info.

Pickup is Charlotte, North Carolina or purchaser arranges crating and shipping at purchasers cost.
Attachments
20200615_132353.jpg
20200615_132320.jpg
20200615_131848.jpg
20200615_131832.jpg
20200615_131800.jpg
Post Reply