Emco 6p CNC w Centroid Acorn FS

Moderator: cnckeith

Post Reply
MasterThrash
Posts: 2
Joined: Wed Sep 05, 2018 5:46 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Emco 6p CNC w Centroid Acorn FS

Post by MasterThrash »

Turn key.

Pristine condition. Previously only cut plastic (as original) and was then stored away. Found almost as new. I've done all work myself to be used for the precision of watchmaking. I'm in need of a different layout for my unique needs so she's got to go and another Acorn retrofit will be in motion. Many more photos available. CNC Keith and Marty where a HUGE help in this, the PLC, and more. Many thanks to these fine gentlemen helping us all. This is an incredible and precise machine the way it is set up now. Save months of work and get to work instead.

VFD input is 220v single phase.

Pneumatic spindle and tail working perfectly.

1- DMM Dyn 4 servos all around
2- Pnuematic tailstock restored and working as new
3- New 220v motor
4- VFD Automation Direct
5- Custom working 8 tool Turret PLC
6- Turret has additional 4 position ER collet acceptance
7- 8 tool turret working off of Acorn
8- Separate control box for Acorn board and DMM Dyn4 servo controllers
9- Original Emco motor included
10- Original 390v Emco motor power supply included
11- NUC computer runs all
12- Base included
13- Original paint
14- Touchscreen
15- Touchscreen arm
16_ Custom ER32 collet on spindle
17- Also have the original Rhome pneumatic 3 jaw chuck working perfectly, included. Basically the price of the machine just for that piece.

$7500

Pickup in Charlotte, North Carolina or purchaser arranges crating and shipping at purchasers cost.
DM for more info and more pics
Attachments
IMG_8022.jpg
IMG_8020.jpg
IMG_8019.jpg
IMG_8018.jpg
20200615_132907.jpg
20200615_132858.jpg
20200615_132816.jpg
Post Reply