5HP Spindle, VFD & Spindle Cooler

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 1549
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI

5HP Spindle, VFD & Spindle Cooler

Post by Gary Campbell »

This is a Chinese (take off on new machine) 3.7kw (5hp), ER20 Collet, 24000 RPM Electrospindle with the following:

Spindle & Aluminum mount
20' Shielded VFD rated cable
3 ER20 collets (user choice)
Collet nut & shaft wrenches
5HP VFD for single or 3 phase operation
18 Ga. shielded Speed & Logic (on/off) harness
All Programming & test Run
All connections and terminals complete
Standard Flow Closed system spindle cooler, spec here: viewtopic.php?f=62&t=4395

Price: $1250 shipped CONUS GCnC411@gmail.com for more info or to order

1) Downsize to 2.2kw (3hp) round body spindle (deduct $100)
2) Upgrade to "High Flow" cooler system (add $100)
Other options on Spindle cooler thread
GCnC Control
CNC Control & Retrofits
Post Reply