2007 ATRUMP CNC Knee Mill & 25K High Speed Spindle

Moderator: cnckeith

Post Reply
Mrcadcam
Posts: 10
Joined: Fri Dec 20, 2019 3:23 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0622050849
DC3IOB: Yes
CNC12: No
CNC11: Yes
CPU10 or CPU7: Yes

2007 ATRUMP CNC Knee Mill & 25K High Speed Spindle

Post by Mrcadcam »

10 x 54 Table
X 31.9”, Y 14.5”, Z 6” (Knee 16”)
Machine comes with a high speed spindle with separate VFD for speed control
Centroid M400 3 axis control
5 HP Spindle with VFD Spindle speed control
Ø 4.125 CAT 40 Spindle
Power Drawbar
Work light
Way covers
Machine on Barry Mounts and easily moved with a pallet jack
Table mounted (removable) 40 taper tool tightening fixture included

Some features of the machine include:
• Oversized column, knee and saddle for added rigidity
• Meehanite cast iron hardened and ground box ways
• Class 7 spindle bearings
• One shot lube
• Honed head and quill
• Precision hardened and ground class – 5 ballscrews
• Main spindle of machine 50 – 5000 RPM
• Included optional spindle with speed control of 5000 – 25,000 RPM
• Optional spindle mounts in the CAT 40 main spindle and utilizes ER20 type collets
Some features of the cnc system and control:
• Fully supported by Centroid corp. in Howard PA
• Solid state hard drive
• 2 USB ports
• LAN port (configured to work with Windows 10 and a cable included)
• Control powers up and operates on 120 VAC
• Spindle power is separate 3 phase that is easily disconnected to avoid turning on when optional spindle is in use.
• Software unlocks for intercon conversational programing and additional work offsets
• 4 gb maximum program size standard

contact me for pricing
570-724-7958
Scott Blackwell
Attachments
20200213_164927.jpg
20200212_161539.jpg
20200212_164137.jpg
20200212_161150.jpg
20200212_163431.jpg
20200212_165123.jpg
20200213_144951.jpg
20200213_144207.jpg
20200213_144149.jpg
Post Reply