A2-5 Lathe Spindles

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

A2-5 Lathe Spindles

Post by martyscncgarage »

I have three as -new lathe spindles with A2-5 spindle nose:
$69 Shipped USPS Priority in the US
Suggested bearing and seal: Timken 30210, Timken 30210M-90KM1, SKF seal 563033 (CR23465)

AS-IS where is. Email me for more information

PayPal Accepted, reasonable offers considered.
If interested, email me directly
martyscncgarageATgmailDOTcom or PM me.
Attachments
Lathe Spindle Dimensions.jpg
A2-5 Spindle2.jpg
A2-5 Spindle1.jpg
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: A2-5 Lathe Spindles

Post by martyscncgarage »

Bump....
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Rs1626
Posts: 3
Joined: Sat Feb 13, 2021 12:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: A2-5 Lathe Spindles

Post by Rs1626 »

Is there internal taper?
No sir. A2 spindle used a nose adapter.
cody.farr
Posts: 2
Joined: Wed Mar 24, 2021 9:40 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: A2-5 Lathe Spindles

Post by cody.farr »

I will take one if you have it
thanks Cody
martyscncgarage
Posts: 7883
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: A2-5 Lathe Spindles

Post by martyscncgarage »

cody.farr wrote: Wed Mar 24, 2021 9:42 am I will take one if you have it
thanks Cody
Still have a couple left.
PM me Cody
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply