Page 1 of 2

Acorn ClearPath DIY Control for AVID & ShopBot

Posted: Thu Sep 26, 2019 3:27 pm
by Gary Campbell
For those looking to build an Acorn with Teknic ClearPath control system. Save the time sourcing high quality parts and the costs of wrong parts and wiring mistakes by taking advantage of this new REZurrection Control product; the Acorn ClearPath.

Features:
Upsized (24x20,8) Steel control Box
Upsized 60W 24V power supply
CNC Drilled and tapped for accuracy
16ga Steel backplane
Up to 60 Amp capable power block, designed to expand
Circuit Breaker Protection for all devices
Accommodates routers or spindles (up to 2) (1 included)
Accommodates Teknic IPC-5 Power Supply (1 or 2) (NOT included) Prewired
IPC-5 Heat Sink Mounting bracket (1 standard)
Acorn 8 CH Relay on Din Rail
4 CH Servo Alarm Relay
Spindle Logic Harness (10Ft)
Spindle Speed Harness (10Ft)
Servo Control Connection Block (prewired & labeled)
Servo Power Connection Block (prewired & labeled)
Cord Grommets for cable entry
Load Break Power Switch
Wire Duct.
Prewired and tested with included Lenovo CNC-PC

$2495 including setup & CNC-PC, Acorn Pro software
$2895 adds C86ACCP & expanded IO terminals
GCnC411@gmail.com for more info

Re: Acorn ClearPath DIY Control Box

Posted: Thu Sep 26, 2019 4:45 pm
by Gary Campbell
For those that need them, I also offer Planetary gearboxes and SB PRT & PRS adapter plates that adapt modern gearboxes to SB Frames. Gearboxes & motors are drilled and/or tapped to mate up with each other and the adapters for a small fee.

PRS NEMA 34 adapters and gearboxes are shown below.
PRS NEMA 23/34 adapter: $75
PRT NEMA 23/34 Adapter: $100
PRS Buddy X Axis Adapter: $150

Re: Acorn ClearPath DIY Control Box

Posted: Fri Sep 27, 2019 9:10 am
by cnckeith
pretty!

Re: Acorn ClearPath DIY Control Box

Posted: Sun Oct 06, 2019 10:18 am
by Gary Campbell
A couple shots showing the PRT model adapter plates
PRT Adapters 2.jpg
PRT Adapters.jpg

Re: Acorn ClearPath DIY Control Box

Posted: Tue Dec 31, 2019 7:12 pm
by erer44
How is the end-play on those gearboxes? Have some helical rack and pinion I'd like to find a use for...

Re: Acorn ClearPath DIY Control Box

Posted: Wed Jan 01, 2020 9:14 am
by Gary Campbell
Initial testing/measurement showed good, but don't have any daily commercial use customers with helical rack to verify end play over time.

Re: Acorn ClearPath DIY Control Box

Posted: Sun Dec 20, 2020 12:07 am
by JamesMacc
Very interested, Gary. Emailed. Building a custom 1500mmx3000mm router, and need this badly.

Re: Acorn ClearPath DIY Control Box

Posted: Sun Dec 20, 2020 9:45 am
by Gary Campbell
We will be in contact this week

Re: Acorn ClearPath DIY Control Box

Posted: Wed Mar 16, 2022 4:06 pm
by hivoltage
Where did you get the box?
I need one for my setup.

Re: Acorn ClearPath DIY Control Box

Posted: Wed Mar 16, 2022 11:51 pm
by Gary Campbell
Depending on the size, Automation Direct or other online sources