Acorn ClearPath DIY Control for AVID & ShopBot
Posted: Thu Sep 26, 2019 3:27 pm
For those looking to build an Acorn with Teknic ClearPath control system. Save the time sourcing high quality parts and the costs of wrong parts and wiring mistakes by taking advantage of this new REZurrection Control product; the Acorn ClearPath.
Features:
Upsized (24x20,8) Steel control Box
Upsized 60W 24V power supply
CNC Drilled and tapped for accuracy
16ga Steel backplane
Up to 60 Amp capable power block, designed to expand
Circuit Breaker Protection for all devices
Accommodates routers or spindles (up to 2) (1 included)
Accommodates Teknic IPC-5 Power Supply (1 or 2) (NOT included) Prewired
IPC-5 Heat Sink Mounting bracket (1 standard)
Acorn 8 CH Relay on Din Rail
4 CH Servo Alarm Relay
Spindle Logic Harness (10Ft)
Spindle Speed Harness (10Ft)
Servo Control Connection Block (prewired & labeled)
Servo Power Connection Block (prewired & labeled)
Cord Grommets for cable entry
Load Break Power Switch
Wire Duct.
Prewired and tested with included Lenovo CNC-PC
$2495 including setup & CNC-PC, Acorn Pro software
$2895 adds C86ACCP & expanded IO terminals
GCnC411@gmail.com for more info
Features:
Upsized (24x20,8) Steel control Box
Upsized 60W 24V power supply
CNC Drilled and tapped for accuracy
16ga Steel backplane
Up to 60 Amp capable power block, designed to expand
Circuit Breaker Protection for all devices
Accommodates routers or spindles (up to 2) (1 included)
Accommodates Teknic IPC-5 Power Supply (1 or 2) (NOT included) Prewired
IPC-5 Heat Sink Mounting bracket (1 standard)
Acorn 8 CH Relay on Din Rail
4 CH Servo Alarm Relay
Spindle Logic Harness (10Ft)
Spindle Speed Harness (10Ft)
Servo Control Connection Block (prewired & labeled)
Servo Power Connection Block (prewired & labeled)
Cord Grommets for cable entry
Load Break Power Switch
Wire Duct.
Prewired and tested with included Lenovo CNC-PC
$2495 including setup & CNC-PC, Acorn Pro software
$2895 adds C86ACCP & expanded IO terminals
GCnC411@gmail.com for more info