KBIC 125 with SI5 board attached on Ebay

Moderator: cnckeith

Post Reply
LASound
Posts: 1
Joined: Sun May 05, 2019 10:24 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

KBIC 125 with SI5 board attached on Ebay

Post by LASound »

Hi everyone,

I just bought this KBIC125 with SI5 board attached on Ebay. Fast three day shipping to Montreal. I got it yesterday, tested it today and its love at first try:)

Around 145CAD and there is more than 10 left. They seem to come with 1/2 horsepower resistor. Mine did anyway.

https://rover.ebay.com/rover/0/0/0?mpre ... 3320923799

Hope this helps someone. :D

I am new to Centroid Acorn (first post hehe) and I have to say that comming from the Arduino CNC workflow, it is such a tremendous pleasure to work with your product. Everything as been working first time on EVERY aspect of my HF 44991 build. More to come on that when I will come back from vacation!
Post Reply