WTB Enclosure

Moderator: cnckeith

Post Reply
DLAM
Posts: 144
Joined: Thu Nov 22, 2018 6:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

WTB Enclosure

Post by DLAM »

Looking for an enclosure for upcoming retrofit project. If anyone can point me in a general direction of a decent source or have one laying around wishing to part with, I would appreciate it. Looking for 30" tall, 24" wide and 10" deep.

Thank You.
J
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: WTB Enclosure

Post by tblough »

Recently purchased almost that size. Trimantec.com was the cheapest I could find with 10% off and free shipping. Saginaw SCE-30EL2010LP which was 30x20x10 and panel SCE-30P20. My total came to $285.49.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Dave_C
Posts: 669
Joined: Wed Nov 15, 2017 8:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Springfield, MO. USA
Contact:

Re: WTB Enclosure

Post by Dave_C »

Looking for 30" tall, 24" wide and 10" deep.
Automation Direct is a great source for enclosures and backplanes. They are not cheap but the quality is very good. I've bought two of the 24 x 24 x 8 enclosures for my Lathe and Mill projects.

Dave C.
Grizzly G0678 Mill ,CNC conversion with Acorn. G4004G Lathe, Mach 3 conversion to Acorn.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: WTB Enclosure

Post by martyscncgarage »

ZORO.COM
Search for NEMA 1 Hinged enclosures
Factorymation.com is another source for enclosures.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply