Takeoff Motors, Drives, Power Supplies, etc For Sale
Posted: Fri Sep 28, 2018 4:25 pm
Many of you know I retrofit imported machines and upfit them for specialty use. That means I am left with a good number of unused electronic parts that I have no use for. If you are looking to get into a self build, these parts may save you some bucks. All of these parts have actually been tested for a few minutes before removal. Unpictured I have a number of switches, fuses, contactors, etc. Prefer to sell quantities around 50% of current pricing and give another 20% on 4 or more (or 5 for the price of 4)
I can customize any or all of these, bore pulleys, machine ballscrews, program drives, supply wiring harnesses , whatever is needed at extra cost, of course.
I accept credit cards or PayPal. I will box and weigh and add shipping costs added at the time of shipping.
Here is a list:
~630 ozin NEMA34 motors (14mm shaft) $40 Buy more than 5, $30 each
DMA860H Stepper Drives (7.2A, AC/DC) Buy a motor & drive, I'll throw in motor wires
Inductive (3 wire) Limit/Home Sensor 3 for $10
Motor Wires 18ga, 15 to 20 ft long $5 each
70 volt AC 1200w power supply $50 each
2.2kw water cooled spindle, wire and VFD 230v single phase input Preprogrammed $250
Contact Gary at GCnC411@gmail.com for more info or to purchase
I can customize any or all of these, bore pulleys, machine ballscrews, program drives, supply wiring harnesses , whatever is needed at extra cost, of course.
I accept credit cards or PayPal. I will box and weigh and add shipping costs added at the time of shipping.
Here is a list:
~630 ozin NEMA34 motors (14mm shaft) $40 Buy more than 5, $30 each
DMA860H Stepper Drives (7.2A, AC/DC) Buy a motor & drive, I'll throw in motor wires
Inductive (3 wire) Limit/Home Sensor 3 for $10
Motor Wires 18ga, 15 to 20 ft long $5 each
70 volt AC 1200w power supply $50 each
2.2kw water cooled spindle, wire and VFD 230v single phase input Preprogrammed $250
Contact Gary at GCnC411@gmail.com for more info or to purchase