Bridgeport R2C3 CNC w/ Centroid Control. Great condition, ready to make chips.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Bridgeport R2C3 CNC w/ Centroid Control. Great condition, ready to make chips.

Post by cnckeith »

i'm posting this for Ken Moses, please contact ken at klmoses@suddenlink.net for more info.

Bridgeport R2C3 CNC w/ Centroid Control. Great condition, ready to make chips. The head is quiet, the quill and ways show very little wear. $10,500
Contact Kenneth at klmoses@suddenlink.net for additional information. link to photo album below

https://photos.app.goo.gl/qBdRvXUUs6kXpgTHA
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply