12 tool ATC turrette

Moderator: cnckeith

Post Reply
Maker1970
Posts: 26
Joined: Thu Apr 04, 2019 10:24 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

12 tool ATC turrette

Post by Maker1970 »

I am currently working on a CR Onsrud retrofit with acorn. In the interest of sticking with 4 axis and saving myself some width in the shop, as this thing is massive, I have decided not to use the turrets that I have. I acquired 2 of these turrets with this auction lot. They are pretty complete save, for the motor to drive them. Requires something with a 34 frame. Stepper or closed loop anything works just fine. Has a 10-1 gear reduction as part of the assembly. Currently has a 63f setup on it, but this can be changed to anything.

This thing is way over built. If you intend on putting it on a light weight gantry, its not for you.

Make offer, again I have 2 available.

Dennis@thehomesteadworkshop.com
Attachments
20241230_114209.jpg
20241230_114240.jpg
20241230_114215.jpg
20241230_114226.jpg
Maker1970

"You lie to your friends, and I'll lie to mine. Let's not lie to each other"


Post Reply