**REDUCED**CNC Depot 4hp 12krpm 4 pole ATC Spindle

Moderator: cnckeith

Post Reply
Gary Campbell
Posts: 2254
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Bergland, MI, USA
Contact:

**REDUCED**CNC Depot 4hp 12krpm 4 pole ATC Spindle

Post by Gary Campbell »

Custom ordered in 2021, this 12,000 rpm four pole spindle is designed for milling metal and plastics, it has a drawbar sensor and encoder added as options. Coupled with an 800 htz Hitachi VFD and controlled via sensorless vector control it has great low rpm performance. Unit has 100-120 hours on it, mostly on personal projects and drilling control box backplanes. Unit has good torque down to 600 rpm, drills down to 400.

Included in the sale are: CNC Depot FM series 12k rpm spindle, Hitachi SJ-P1 VFD, ~27' VFD Wire, 6 ISO30 tool holders, with ER32 or ER25 collets (or a mix as shown), collet wrench, air solenoid manifold, air tubing, M8 wires for sensor & encoder (not shown). VFD is programmed and ready to run, will provide video of warmup/speed test before shipping. This package is currently listed onthe CNC Depot website as the RM-40F @ $4895 without the sensor and encoder. If needed, these items can be combined into a modular control box with 14 pin Cable for AVID or 6 wire Harness for ShopBot machines.

Price is $2000. Add $250 for modular control box and wiring. I accept PayPal or Credit Cards. Shipping available at extra cost.

Email: gcnc411@gmail.com for more info or to purchase
DSC01209.JPG
Attachments
DSC01218.JPG
DSC01217.JPG
DSC01215.JPG
DSC01214.JPG
DSC01213.JPG
DSC01212.JPG
DSC01210.JPG
Last edited by Gary Campbell on Sun Jul 21, 2024 9:42 am, edited 1 time in total.
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos


Gary Campbell
Posts: 2254
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Bergland, MI, USA
Contact:

Re: **REDUCED**CNC Depot 4hp 12krpm 4 pole ATC Spindle

Post by Gary Campbell »

Price Reduced to $2500 as noted above.

This system can be assembled into a custom control box and wired to be compatible with most machines.
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos


Gary Campbell
Posts: 2254
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: Yes
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Bergland, MI, USA
Contact:

Re: **REDUCED**CNC Depot 4hp 12krpm 4 pole ATC Spindle

Post by Gary Campbell »

Time to get this item out of the shop. Price reduced to $2000
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos


Post Reply