WTB Lathe

Moderator: cnckeith

Post Reply
DLAM
Posts: 144
Joined: Thu Nov 22, 2018 6:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

WTB Lathe

Post by DLAM »

All, I am looking for a older lathe that I can upgrade to Centroid control. Ideally I would like on Older Emcoturn machine with turret, A Omniturn GT75 or similar size machine. I do not want a table top machine or a large machine that would take a lot of space in my shop. I really like Centroid's control and software and to get a machine equipped with Centroid control I think I have to do the conversion myself. Any leads is greatly appreciated
thelinuxman
Posts: 3
Joined: Thu Oct 13, 2022 2:22 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: WTB Lathe

Post by thelinuxman »

Don't know where you are geographically, but I don't know how you could get a project much cheaper than this.
https://www.ebay.com/itm/185883689673

FYI, I have nothing to do with this sale.
DLAM
Posts: 144
Joined: Thu Nov 22, 2018 6:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Re: WTB Lathe

Post by DLAM »

Thank you, That is a possibility. I appreciate the lead!
Post Reply