Back For Sale! Bridgeport Boss CNC Knee Mill, original condition, like new. with Allin1DC kit

Moderator: cnckeith

Post Reply
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Back For Sale! Bridgeport Boss CNC Knee Mill, original condition, like new. with Allin1DC kit

Post by cnckeith »

Bridgeport Boss CNC Knee Mill, original condition, like new.
possibly the nicest Boss knee mill left, very very low hours. I purchased from a tech school. this machine has seen very little use.
the quick change collet still looks untouched, i don't think they every changed a tool.
$5300 machine
or
$7000 with Allin1DC kit, Mill Pro License and New Encoders for the 3 servo motors.
email cnckeith@gmail.com

Heavy Duty PA Oak pallet and blocking included in the price.

IN DRY STORAGE in eastern NC

link to better photos.
https://photos.app.goo.gl/HSg52aPzUdoX6d7i6
Attachments
P1030519.JPG
P1030529.JPG
P1030521.JPG
P1030536.JPG
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
tblough
Posts: 2209
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by tblough »

Between this thread and the router you are just flaunting your wealth with all that lumber out in the open. ;-)
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by cnckeith »

it is a nice pallet:-))
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: PRICE DROP, NEED IT GONE Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by cnckeith »

hi, its in storage, i can get to it in June if interested. thanks, k
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Tlempicke
Posts: 139
Joined: Wed Jul 04, 2018 1:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: PRICE DROP, NEED IT GONE Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by Tlempicke »

What voltage is it? Is the Mill complete and operational? When you specify the Allin one kit, is it installed or just in boxes. What does it weigh? The June time frame works well for me, I am in Florida for the duration of the winter.
How about contacting me on my E Mail
tom@lempicke.com
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: PRICE DROP, NEED IT GONE Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by cnckeith »

hello.

the machine weighs 2750 lbs

allin1dc is in a box.

machine is as seen in the photos, clean, original and ready for upgrade

the control including the servo motors all run off of 110 VAC, the spindle motor can run off of 220 single phase with a modern VFD installed.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Setlab
Posts: 33
Joined: Tue Sep 29, 2020 10:00 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by Setlab »

Where is it located?
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Back For Sale! Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by cnckeith »

hello. Eastern North Carolina
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Back For Sale! Bridgeport Boss CNC Knee Mill, original condition, like new.

Post by cnckeith »

buyer had to back out of the sale for unrelated reasons, so this machine is now once again up for sale!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
XYZgnomon
Posts: 16
Joined: Sat May 14, 2022 3:34 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Back For Sale! Bridgeport Boss CNC Knee Mill, original condition, like new. with Allin1DC kit

Post by XYZgnomon »

Eyeballing that E30 on jackstands. Saddest day of my life was watching my 1990 E320i being hauled away when I moved back to the US.
Post Reply