VCP 2.0 (Virtual Control Panel) Manual and Video

Moderator: cnckeith

Locked
cnckeith
Posts: 2927
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

VCP 2.0 (Virtual Control Panel) Manual and Video

Post by cnckeith »

VCP 2.0 (Virtual Control Panel) Manual and Video

Comprehensive VCP 2.0 user manual
https://www.centroidcnc.com/centroid_di ... manual.pdf

Introduction video.

When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Locked