METRIC: MM: How to configure Acorn CNC12 for use with millimeter Machine tool units.

Moderator: cnckeith

Locked
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

METRIC: MM: How to configure Acorn CNC12 for use with millimeter Machine tool units.

Post by cnckeith »

How to configure Acorn CNC12 for use with millimeter Machine tool units.




forgot to mention in the video if you are using Auto Squaring be sure to use MM values for the Gantry Homing Feed rate (200-750 mm/min) and the squaring distance. (user determined and machine specific)
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Locked