I made this video so that users can test their Acorn Spindle Analog Output as part of the Benchtest. This ensures that the output is functional before wiring up the spindle drive to it.
REMEMBER, ACORN SUPPLIES THE 0-10VDC. DO NOT CONNECT VOLTAGE FROM THE DRIVE TO ACORN'S SPINDLE ANALOG OUTPUT and DO NOT USE ACORN IN PLACE OF A POTENTIOMETER or you will likely damage it. (Expensive lesson to learn)
Quick Tip: Bench testing Acorn's Spindle Analog Output
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Quick Tip: Bench testing Acorn's Spindle Analog Output
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ