Video: Installing a KB Electronics KBIC-120 & SI5

Moderator: cnckeith

Locked
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Video: Installing a KB Electronics KBIC-120 & SI5

Post by martyscncgarage »

In this video, I removed the old DC brush spindle control and replaced it with a KBIC-120 Control with matching SI-5 Signal Isolator.
The Signal Isolator is REQUIRED to be used with Acorn and accepts the 0-10VDC input.
I go through the removal, installation, connection and calibration using the CNC software.

Hope it helps those wanting to control their DC brush spindle motors with Acorn

Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Video: Installing a KB Electronics KBIC-120 & SI5

Post by cnckeith »

Franco CNC video on KB DC motor controllers
Part 1



Part2

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Locked