Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained

Moderator: cnckeith

Locked
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained

Post by cnckeith »

Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained

Post by cnckeith »

Acorn_rev4 and CNC12 v4.14+ New Feature: Acorn BBG Heart beat light has been piped out to the Acorn 24 vdc Power indicator LED so now that LED serves two purposes.
1.) confirms 24 vdc logic power has been applied to the Acorn board
2.) echos the BBG "heartbeat" led so that it is easier to see, confirming that the BBG has booted Centroid Acorn firmware and is ready to run.

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Centroid Acorn Ethernet and Firmware Heartbeat status LED lights explained

Post by cnckeith »

part 3 of led's explained.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Locked