A discussion of what exactly are CNC Lathe Tool Offsets for X and Z

Moderator: cnckeith

Locked
cnckeith
Posts: 3595
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

A discussion of what exactly are CNC Lathe Tool Offsets for X and Z

Post by cnckeith »

A discussion of what exactly are CNC Lathe Tool Offsets for X and Z and demonstration of how to measure tool offsets using the CNC machine to figure out the difference in length (the offset) between various tool using a Centroid Acorn CNC control equipped Dyna 3000 Lathe.

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 3595
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: A discussion of what exactly are CNC Lathe Tool Offsets for X and Z

Post by cnckeith »

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Locked