No spindle spin up

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
lavrgs
Posts: 529
Joined: Sat Aug 11, 2018 11:22 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Oregon

No spindle spin up

Post by lavrgs »

I've been away from the mill for a couple weeks and when I started it today I am unable to run the spindle. I'm guessing it may be a windows update caused problem ...
Attachments
diag screen 3_27.png
report_402E71CADC40-0323214550_2024-03-27_10-31-39.zip
(4.95 MiB) Downloaded 2 times
Top
dpascucci_support
Posts: 93
Joined: Thu Sep 21, 2023 9:24 am
Acorn CNC Controller: No
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: No spindle spin up

Post by dpascucci_support »

Is there a fault on the VFD? How are you commanding the spindle to move?
Domenic

When requesting support READ THIS POST first.

Please ALWAYS post a FRESH report.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Top
lavrgs
Posts: 529
Joined: Sat Aug 11, 2018 11:22 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Oregon

Re: No spindle spin up

Post by lavrgs »

I tried to spin manually and with MDI. I had a spindle fault that I cleared ...I just gave it a boost by hand and it spun up. I'll keep and eye on it
Top
Post Reply

Return to “Centroid Acorn CNC Controller”